New Member, Homegrown '00 Old and New Project

You are here

14 posts / 0 new
Last post
mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm
New Member, Homegrown '00 Old and New Project

Hi, New member here. I just bought an NOS 2000 Homegrown Factory to restore. I had one back around 2002 - first photo. Looking to build a replica with upgrades. Also had a 2001 Rocket 88 around the same time in 2003-2004 - second photo. Sourcing parts right now, but will be modern with vintage accents.


livernose
livernose's picture
Offline
Last seen: 3 days 14 hours ago
Joined: 10/25/2010 - 10:10pm

Nice. I just sold a 2001 Rocket 88 last year, never built, still in the box.

Jeff
94 Underground aluminum cracked frame
2- 97 Underground composite
97- Homegrown Factory
99- Homegrown Pro
01- Homegrown Factory Limited

mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm

Nice NOS R88. Didn't have mine long because the rear triangle was too obtrusive. Looked cool and seemed to work well, but there were better designs out by then.

mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm

Started to put things together. Yes, it will be a 650b conversion. Had to file off a corner of the 960 rear caliper, but love the hose direction. It will definitely need a 170mm rotor at least. The rear brake boss hose guide works well, but I have to paint it. Pretty sure I'm going to rivet hose guide underneath the top tube because every other option looks terrible. I was fortunate to find a non-taper Fox fork with 15mm axle. Coming together nicely. Waiting on Wheels, chainring, M900 hydro levers, and tires.

Here's the spec
2000 Homegrown Factory
Fox F100 RLC
XTR M9000\960 brakes
Easton XLT 27.5 Wheels
Easton Monkey Lite riser bar
Thomson Stem
XTR M952 Crankset with XT spider and Blackspire Chainring
Sunrace 9 speed 11-40 cassette black
XTR M952 rear derailleur (no front)
Easton CT2 seatpost
Selle Italia Flite Gel Saddle

mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm

1x9, 11-40t

livernose
livernose's picture
Offline
Last seen: 3 days 14 hours ago
Joined: 10/25/2010 - 10:10pm

What brand/size are those tires? You've got a nice amount of clearance.

Jeff
94 Underground aluminum cracked frame
2- 97 Underground composite
97- Homegrown Factory
99- Homegrown Pro
01- Homegrown Factory Limited

mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm

Sorry, I have a 26" with Specialized fast trak on just for the fitting of the rear disc. I'm still waiting on my 650b wheels.

mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm

Progressing nicely. After fitting the rear brake everything else is easy. Test fit the new Easton 650b wheels with Maxxis Ardent Race\Ikon tires, both 2.2 wide. Still plenty of space front and back. Now I'm waiting for my rivet tool to install the hydraulic cable guides. They'll go under the toptube slightly to the left. Other things to do are to lower the fork travel to 100mm, rivet the guides, swap out the rear brake lever, install the rest of the parts.

livernose
livernose's picture
Offline
Last seen: 3 days 14 hours ago
Joined: 10/25/2010 - 10:10pm

You're gonna drill the frame? Have you thought about hydraulic brake guides that screw into the cable guides on the top tube? https://www.amazon.com/gp/product/B06WVHG64G/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A377L3CGYOW774

Jeff
94 Underground aluminum cracked frame
2- 97 Underground composite
97- Homegrown Factory
99- Homegrown Pro
01- Homegrown Factory Limited

mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm

Yes. Any other option looks like a terrible afterthought. Until fairly recently many frames still had riveted guides. Cannondales (and Yeti's) had them for a very long time and their tubes' walls were ultra thin. They even used them for front derailleur mounts on the CAAD10 which actually take stress. 1.These guides will not experience any real force against them as they simply hold a light hose, no pushing or pulling. 2.The center sections of tubes are low stress area. 3.The guides are tiny about the size of a dime and only require 4-3/32" holes. Cosmetically the guides will be low profile and virtually hidden from view. No brainer. The only downside is the permanent change to the original Homegrown. I'm ok with it because it will be a professional look and part of the frame as it should have been initially.

mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm

Hose guides installed.

mtbric
Offline
Last seen: 5 days 18 hours ago
Joined: 05/31/2017 - 1:45pm

Pretty much complete. Test rode and drivetrain works better than expected. The bottom bracket is a Dura Ace 109mm for better chain line. The chain is 10 speed KMC that I had sitting around though I'm not crazy about the gold. A 10 speed chain is recommended for the Blackspire ring. Left to do: Install XTR 9000 lever for the 960 rear brake, shorten the front hose, install longer B Screw for the rear derailleur for a bit more clearance for the 40t cog.

livernose
livernose's picture
Offline
Last seen: 3 days 14 hours ago
Joined: 10/25/2010 - 10:10pm

Looks lean and mean!

Jeff
94 Underground aluminum cracked frame
2- 97 Underground composite
97- Homegrown Factory
99- Homegrown Pro
01- Homegrown Factory Limited

surfink
Offline
Last seen: 1 day 14 hours ago
Joined: 07/26/2009 - 7:55pm

That is a beauty...