- This topic has 27 replies, 2 voices, and was last updated 7 years, 3 months ago by
.
- Posts
97 Factory Homegrown set. Top tube script and S wrap, seat tube wrap and downtube decals. These are not velocal, I got them made in California.
Last but not least 98/99 Homegrown Pro decals. These were more expensive than the others, but super nice. Bought them from Rich Adams.
This is the set I was imagining. I would remove the “Factory” for my bike beacuse I don’t want to falsify the frame any more than the color change.
I have these, but they are more for the stock 98-99 frames (which mine is) but the new paint scheme is more relatable to the original downtube decals.
These are nice and exactly what my frame came with, but I’m going away from this look. If I was doing a two-tone color these would be IT.
Epicenter seatstay decals. These are velocal. I had them re-size them to the original size. The ones velocals sells are much larger than the original size.
Here’s a few pictures of the seat tube wrap. I have a bottle cage on it so you can’t actually see the hole I punched in the front of the decal, but you can get the general idea of where the hole is in the decal. The other photo is of the rear of the seat tube. Not a great picture and there is a cable running right in the space where the decals meet in the back. I put the middle decal on first using the cable stop at the top as a guide for punching the hole in front for the bottle cage bolt. Next I put the top decal on using the cable stop as a guide for the spacing. Then measured the spacing between the middle and top decal and used that for the middle to lower lower decal placement.
- You must be logged in to reply to this topic.