Schwinn Homegrown Model Identifier Forums The Shop Wanted Project Colorado Control Tech Seat Clamp

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #1821
    EP3MTB
    Member

    I’m trying to track down this seat clamp. If anyone has one, an old busted frame with one, whatever, please let me know. Pics are borrowed from a past ebay listing. Thanks for your help, Kevin

    #5835
    bikeric
    Member

    [img]https://i.imgur.com/SWElXgR.jpg[/img]

    [img]https://i.imgur.com/muLqAmn.jpg[/img]

    [img]https://i.imgur.com/YUCe5Ha.jpg[/img]

    [img]https://i.imgur.com/jPqLRGj.jpg[/img]

    Would cost you $28 + shipping to have it 3D printed out of bronze/steele.

    #5836
    EP3MTB
    Member

    Thanks so much for that drawing! Sent you a PM. smiley

    #5837
    livernose
    Participant

    I bought that frame. Spent WAY TOO MUCH, but I wanted one to make a display bike. That post clamp is one exactly like the one on the Project Colorado.

    #5838
    Avatar phototomatoadmin
    Keymaster

    What, no gold plating? *fool*

    #5852
    EP3MTB
    Member

    Huge thanks to member bikeric for drawing this clamp. I was able to get it 3D printed in steel and painted it to resemble aluminum. I’ll still hunt for an original, but I’m happy with what I’ve got.

     

    ep3mtb-dsc0178.jpg

    #5867
    livernose
    Participant

    Did you tap threads for the binder bolt?

     

    #5873
    EP3MTB
    Member

    Yeah, it was not fun running an M-5 tap through that material, felt like cast steel.

    #5874
    dmfan2
    Member

    Hey, I have the unicorn you’re looking for if one of you still need it…

    dmfan2-dddfe1d4-113c-4a44-b90e-789467bdb623.jpeg

    #5877
    EP3MTB
    Member

    Sent you a pm smiley

    #5878
    livernose
    Participant

    Nice.

    #5881
    EP3MTB
    Member

    Thanks to dmfan2 I have an original clamp! If anyone else here is searching for one, you can have this 3d printed silver clamp. It’s not exactly like the original, it’s a little rough around the edges, but it’s a good place holder until you find an original. A couple of bucks to cover shipping and it’s yours.

     

    ep3mtb-dsc0182.jpg

    #5884
    livernose
    Participant

    Awesome find. You found a Unicorn!

Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.
Scroll to Top