Forum Replies Created

Viewing 10 posts - 16 through 25 (of 25 total)
  • Author
    Posts
  • in reply to: From the ground, somewhere near the Tomatoes #5344
    shadoc
    Member

    So last weekend I picked up a decent donor 17” Homegrown for $300, has XT components with a 9 speed cassette, Easton bar and seat post, decade old Fox F100 RLT with good rebound, Cane Creek headset (sealed bearing!!), newer Schwalbe Hans Dampfs on Magic XC 717s, Avid single digit 7 brakes.  To me, these are major upgrades!  And from what I can tell so far, everything is compatible (in this image, I had swapped the seat posts).

    shadoc-72d096fe-15ac-49f1-bc1d-0f96ed5ae1f8.jpeg

    in reply to: shot in the dark #5334
    shadoc
    Member

    Well, I’ve been trying to start a new post with my history to Homegrown and why I’m and so attached to my frame, but have been getting an error.  Anyway, here’s where we’re at, hopefully will submit

    shadoc-461bb5df-b357-4c4a-860c-8d2a8cdc6518.jpegshadoc-4001b5d6-636e-496b-82a1-fa84ffab94d7.jpegshadoc-7931b133-4991-40cb-8a4e-1ca975699f74.jpegshadoc-5e4d4cbd-9454-4489-b57f-935e2def6e70.jpeg

    in reply to: shot in the dark #5333
    shadoc
    Member

    I did, I’ll post some pics of progress later.

    in reply to: shot in the dark #5324
    shadoc
    Member

    Thanks, Jeff.  I’ll do some research and take measurements this afternoon.

      What year do you think that bike might be?

    in reply to: shot in the dark #5322
    shadoc
    Member

    Thx for quick response! I got him to $300. Will those components transfer to a 19″? Both are 26″.

     

    in reply to: shot in the dark #5314
    shadoc
    Member

    I’ve been looking around for components to swap onto my 19″ ’96 s96 .3, ideally off of a Homegrown.  I just want to keep my original frame.

     

    I found this local, supposedly a 17″.  It has a Fox fork, wondering if it’s worthwhile?  Not sure of year of this “homegrown”.

     

    From seller:

     

    “I am selling my schwinn Homegrown Mtn Bike. It is in really great condition. It has been professionally powder coated and well taken care of. It is an old bike, but one of the originals! The frame was actually built by yeti for schwinn. Its a great classic bike. It has Xt components avid brakes. New Schwalbe tires.”

     

    Thoughts?

    shadoc-00i0i6bpzjukzca61200x900.jpgshadoc-00z0z4igjolmdwxt1200x900.jpgshadoc-00u0uinsotf3c9he1200x900.jpg

    in reply to: Any ideas on if this is legit or a clone? #5208
    shadoc
    Member

    Sorry for late reply, I have been following this thread.  The bike was for sale on the ‘bay when I found it, but after a bunch of research, it had previously been posted a few times in a CL listing out of Redding, CA.  Someone basically posed this bike as an “original’ built from Schwinn factory and given direct to a Schwinn BMX racer who then sold off.  The whole story was just mysterious and elusive enough to get my attention, mixed with a too-good-to-be-true price, but I passed at the end of the day.

    A big thank you to this site for the info around here!  Hopefully goes to show how coveted a true homegrown is (and should remain).

    in reply to: Any ideas on if this is legit or a clone? #5204
    shadoc
    Member

    And what is this?

    shadoc-549c85af-82b2-47b8-8058-663e9c13d13e.jpeg

    in reply to: Any ideas on if this is legit or a clone? #5203
    shadoc
    Member

    That green round stickie, I have a few of this from my LBS from circa 1996…  What about the rest?

    in reply to: Any ideas on if this is legit or a clone? #5194
    shadoc
    Member

    Does the riveted badge on seat post mean anything?  Supposedly this was a custom build for a Schwinn racer, although this is a 17.5” for a 6’1” bmx dude…

    shadoc-9b08d753-1068-4eb7-88f6-fd150784fee6.pngshadoc-6f3431c0-6a31-4083-b8c6-224974005e4b.pngshadoc-c8fcff5d-aa1f-4164-9fc2-2d03a1f501e0.pngshadoc-226d9463-0983-4740-bc32-6076cc5982c1.png

Viewing 10 posts - 16 through 25 (of 25 total)
Scroll to Top