Forum Replies Created

Viewing 15 posts - 1 through 15 (of 25 total)
  • Author
    Posts
  • in reply to: 1998 Homegrown XT wanted #2834

    “Better orange than mine, mine is really dark. That one is more orange-y. Seems the BBO wasn’t very consistant.”

     

    Funny you mention that,  I’ve seen around 12 bassboat orange homegrowns – ranging in shades of “orange” –  some almost a neon-orange, while others had a deeper/darker orange with more of a red tint.      I’m not sure if this is due to a paint error, environmental impact or run of frame build.    

    The most consistent bassboat colors were the bassboat blues, the lxt bassboat red and the Bassboat green – (which I believe is probably the hardest frame to find)

    in reply to: 1997 Factory Suspension XTR; almost completely stock #2833

    Holy Crap – it is damn near the Holy Grail of Homegrowns…..

    in reply to: New guy here trying to find frame information… #2832

    My guess — is that you’ve got yourself something of a mutant..   Someone along the line went in, tweaked the shocks and then you obtained the bike. 

    Sounds cool, would like to see the pictures – particularly of the 99′ banger..     I don’t know about a lot of folks, but I did enjoy the 2000/2001 Schwinn full-suspension rigs.  they were fun to bounce around on…

    in reply to: 1998 Homegrown XT wanted #2828

    Great find, Great set-up….. Enjoy the 98 XT in Bassboat Orange

    in reply to: 1999 Homegrown Pro 21″ wanted #2825

    Please email me at jasonluebke@gmail.com if you would have any interest in otherwise selling said frame..

    thanks

    in reply to: Homegrown Factory ? #2808

    I would estimate the “worth” of the frame would really depend on the buyer – I’ve sold frames for as little as $100 and as much as $300……. 

     

    Pictures always help. As do popular frame sizes 17, 19 & 21 inch.

    in reply to: 95 Homegrown USA Full Suspension? #2800

    That’s just awesome man.. Terrific setup.  Good luck with the Judy SL repair..

    in reply to: 95 Homegrown USA Full Suspension? #2795

    Hey, cool find — any pictures/ what the paint job is?  My guess is it was a late 1995 build, not a 1996 final product but it got out —  I would love to see it, but I believe you probably got a heck of a set up..    From my understanding it was May/June of 1995 when they were finalizing the 1996 full suspensions..

    One thing to remember at least from my experience is that with the homegrowns, if you made a late in year order – you could get a transition frame. Just like Blue72beetle said, there are many different paint jobs out there, some custom done, some done during transition.  I also know that the Schwinn/GT warehouse that was in Northern Illinois would hold warranty frames, so when riders within that distribution area would trade in a frame if breakage would occur, they could ship out the warranty frame ASAP — this was a luck-of-the-draw thing, sometimes you’d get the exact frame as a replacement or sometimes you’d get one that was a flip-flop of a paint job, or whatever.   One rider that frequented my bike shop actually got a 1999 Homegrown Elite frame in August of 1998 to replace his 1997 buffed frame that developed a crack in the bottom bracket…     I still think you got yoursself quite a prize there..  especially since the chainstay yokes are pre-Yeti..   Out of curiosity, about how much does the bike weigh?>  I would guess if you could get it on a scale it would ring in about 21.3 pounds total..

     

    By the looks of it, it looks like you have a 1995 Homegrown Frame, built-up by a previous owner.  The frame looks to be in amazing shape.  My concern would be that you are using too large of a rear tire, it looks like it is pretty close the frame.  It is not a Proj. Underground, as there isn’t any transition to the drop-outs Carbon-Titanium, rather it’s a one piece.   If all the derals & head-set are clean & good to use, the chain isn’t worn out or the cranks – you got yourself one hell of a steal.  

    in reply to: Funny Observation 1997 Homegrown Frame #2742

    There it is, right there on the left drop out,  even better – it matches the one I recorded on a piece of paper in my toolbox.   SMRT, damn near briliant really. 

     

    in reply to: Funny Observation 1997 Homegrown Frame #2735

    Hadn’t looked there — will do..  Thanks

    in reply to: 99 Factory frame #2733

    This is aimed at Blue72Beetle

     

    http://cgi.ebay.com/NOS-SCHWINN-HOMEGROWN-MOUNTAIN-BIKE-EASTON-HEAD-BADGE-/380248710163?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item588896dc13   this auction is for the frame decal from the early roll out 95/96/97 Homegrown Factory frames…

    in reply to: 99 Factory frame #2727

    As I recall, I’ve never seen a Homegrown Factory frame with a sticker like the square 6061..  I know some of the Homegrown Factory/Homegrown XT frames had stickers indicating that Easton provided a specialized aluminum for the frames.    The 1997 series bikes had a frame material sticker just below the Seat tube/top tube welds…   The Easton stickers on the Factory/team issue bikes had them in the same location.     

    I know I’ve seen a few of these Easton stickers/badges on ebay & craigs-lists postings randomly.. to match up exact years I couldn’t begin where to tell you.

     

    Off topic/track a spell — that’s a fantastic frame you have there in the bassboat red/silver.   I am working on locating one for myself.   Even more off topic – I cannot think of any better paint-job anywhere ever than the 1997 Homegrown Factory bass-boat blue..  or the bass boat blue on the project underground. 

    I went through my boxes of biking stuff again — I don’t have any of the frame material stickers as extras, etc.     Between those, the 1996/1997 Homegrown frame decals, we could start our own hunt for the Holy Grail.       

    Another off-topic – anyone have any input on these 1998/99 frame decals available on Ebay for like $120 bucks?  The images aren’t terribly good, but they don’t look like they’d fit the frame accurately…

     

     

    EDIT –=  the 2000/2001 Homegrown decal sets with the N’Lightened Tubing had some of the worst decals ever.  thanks.

    in reply to: 99 Factory frame #2725

    Blue —

     

    I’ve seen the frame both ways having worked at a bike shop during 1998-1999-2000,   I had seen some of the early 99’s roll out with a tomato, and then the rest rolled out with the Epicenter Seat Stays sticker.    I’d also seen frames w/out sticker (fell off due to shipping/other common Bassboat sticker issues and not sticking)

    Most 99 frames/HG’s that I have seen, owned, etc all had the Epicenter seat stays sticker.     

Viewing 15 posts - 1 through 15 (of 25 total)
Scroll to Top